How to choose warning road signs for Anyang parking lot? Let’s talk about the methods of local manufacturers

In our industry, we often get inquiries from local customers in Anyang, saying they want to install a batch of warning signs for their parking lots or internal roads. However, faced with the wide variety of manufacturers on the market, they really don’t know how to choose. The price difference is quite large, and the opinions vary. Some say that using this The material is good, and some say the craftsmanship is durable, which all sounds reasonable, but in the end it makes me even more confused. Today I will not deal with those empty theories, but combined with the actual situation in Anyang, talk to everyone about what points should be focused on when looking for manufacturers to make such signs.

First of all, you must understand that warning signs in parking lots and internal roads are not exactly the same thing as traffic signs on the road. Although they must comply with the basic regulations of the national standard (such as prohibitions, warnings, and instructions, you cannot change the color and shape of these signs), but they are more focused on solving specific problems in "specific sites." What is most commonly needed in a parking lot? “"Height limit", "Slow down", "No turning", "Parking direction arrow", "No occupation of fire exits"... these signs must first be garish , in an environment where there may be insufficient light and complex movement lines of vehicles and pedestrians, not being eye-catching enough means not being installed.

So you see, the first key point is Materials and workmanship Yes, there are some small workshops here in Anyang. In order to keep prices down, they use very thin aluminum plates or low-quality reflective films. At first glance, they look cheap. They are okay for the first few months after installation, but they cannot withstand the test of time. It is cold in the winter and exposed to the sun in the summer here, and the temperature difference is large. The thin plates are easy to deform and bulge, and the low-quality reflective films fade after a year and a half. , peeling off, and does not reflect light at all when car lights are shined at night, then the warning effect is greatly reduced. Reliable manufacturers will at least recommend you to use engineering-grade reflective film above the national standard. Use an aluminum plate or galvanized plate with sufficient thickness for the bottom plate. The corners should be rounded and the installation holes should be precise. In terms of technology, silk screen or film? Nowadays, the mainstream is high-definition UV printing, which has strong colors and good details, especially those with patterns or logos. The effect is much better than silk printing in the past. When you talk to the manufacturer, you can specifically ask them what kind of film they use, how thick the board is, and what the process is. An experienced manufacturer will explain it clearly to you, instead of just saying "no problem, easy to use."

The second doorway is at design rationality This is often easily overlooked, but it is a particularly critical link in actual use. A good manufacturer should not just be a "processing factory". He must be a bit like a design consultant. There are several steep corners in your parking lot. Simply putting up a "speed down" sign may not be enough. Do you want to draw a speed bump pattern on the ground at the starting point of the ramp? Should the no parking sign on the fire escape be on a pole or posted on the wall? How high is the pole? Will it be blocked by vehicles parked all year round? For these details, experienced local manufacturers have done work for many communities, shopping malls, and factories in Anyang. They understand the common local site layout and driver habits, and can make very practical suggestions. Sometimes you save money on a brand, but a small scratch may be caused by insufficient warnings, and the loss is much greater than the cost of the brand.

Let’s talk about it again Installation and after-sales No matter how good the brand is, it is useless if the installation is crooked or loose within a few days. Regular manufacturers usually provide installation services, or at least give professional installation guidance. They know what basic fixing method is more reliable on the common roads in Anyang (cement floor, asphalt floor, brick floor), and you need to ask more about after-sales service.: How long is the warranty? Do you care about non-human damage such as rapid fading or plate cracking? If there is a problem, will it be handled at home or do you have to disassemble it yourself and send it back? Don't underestimate these, it can tell whether a manufacturer has confidence in its products and whether it plans to do long-term business.

Finally, let’s talk about how to find manufacturers in Anyang. Nowadays, information is convenient and can be found online and offline. But here are some suggestions: It’s best to go and see it in person , see if the manufacturer's production workshop is clean and orderly, look at the finished product samples they have made, feel the thickness of the board with your hands, feel the corner treatment, chat with their business or technology, and listen to their understanding of different application scenarios. Are they following the script, or do they have real practical experience? Reliable local manufacturers in Anyang often have faster service response times and low communication costs. If you have any questions, they may come over and take a look at them with just a phone call.

Choose a local parking lot warning road sign manufacturer in Anyang, Don’t just compare the numbers with the price , think more about it: Can the materials and technology withstand the local climate? Are the design suggestions thoughtful and practical? Is there any guarantee after the installation? To sum it up, if you find a partner that is moderately priced but solid and reliable in all aspects, then these signs can really become the "silent guards" of your site's safety, and you will be worry-free for many years. After all, the purpose of installing this thing is to ensure long-term safety and understanding. Do you think this is true?